The Bass! Part 4,

Part 1:  http://angjellockheart.blogspot.com/2014/10/the-bass-there-are-no-such-things-as.html

Part 2:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-2.html
Part 3:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-3-punk-rock-bass.html

So I had been waiting on the bridge to arrive, and it finally did. 

While it was not an exact replacement of the old one, the saddles lined up just fine.  And in the end, that's what's important.

I then had to deal with the pickguard not lining up exactly.  However, the use of a long screw took care of a, now, tiny problem.

As you can see, it worked out pretty good.  It holds rather nicely.

However then came a problem I did not forsee.  This happens with older guitar or bass necks.  With no tension on it, the neck is straight.  But with the strings at full tension the heal kicks up.  So I am torn between having insanely high action, or the frets not being playable from the 12th fret up. 

Now, the normal way to correct this is to yank out the frets below the 12th fret, shave the fingerboard, and replace the frets.  However, the fingerboard is maple, and if I shave it I will have to re-finish it.  Right now, I don't have time for that.  I have to make the bass somewhat playable for the next gig. 

Once we cross that bridge, I will go back and start work on it.  I might be able to shave the frets down, and make it playable.  But I'll deal with that when I get there. 

I knew I would be a pain to put this thing together, but I didn't think it would be "THIS" much of a pain.  I did a lot more work on this thing than I had planned to. 

But here's the result.  Not too bad.

The Bass! Part 3, Punk Rock Bass

Part 1:  http://angjellockheart.blogspot.com/2014/10/the-bass-there-are-no-such-things-as.html

Part 2:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-2.html

So I have been having problems with the wiring.  Seriously, I've been working something like a week on it.  But instead of making a long story out of it, I'll just say this.  It seems one of the volume pots was bad, and not sending enough signal through to the tone pot.  That's why I couldn't get the tone pot to work.

I do want to say now that the volume is LOUD!!!  Now that I have a proper working volume pot, it's surprising just how loud these Dragonfire active pickups are.  I can't wait to get strings on this bass.

And simply put, I yanked out everything, and started with all new parts.

So after getting all the electronics working, I made holes for all the screws, and fitted the pickguard and output jack. 

Even though I don't have the bridge yet, I used my straight edge to get a proper angle on how I should shim the neck.  I used a rather thick piece of wood, and shimmed it.  It came out exactly how I wanted.  I may have to adjust it further once I get the bridge in, but it's a good start.

So onto the pictures!!!

So the bass looks very worn and punk rock to me.  It was a great bass to get some practice in on a few things.  More to come when I get the bridge in the mail, and get the bass finally set up.