The Bass! Part 5, The Real Punk Rock Bass

So I have had a long series of posts about this bass.  Here are the previous posts.

Part 1.

http://angjellockheart.blogspot.com/2014/10/the-bass-there-are-no-such-things-as.html

Part 2. 

http://angjellockheart.blogspot.com/2014/10/the-bass-part-2.html

Part 3. 

http://angjellockheart.blogspot.com/2014/10/the-bass-part-3-punk-rock-bass.html

Part 4.

http://angjellockheart.blogspot.com/2014/10/the-bass-part-4.html


So what could possibly happen that this time around with this bass?  To make a long story short, I have already replaced the pickups, the bridge, the pickguard, and moved the output jack.  I also refretted the neck, because honestly, those frets where more or less falling out of the neck.

But after a bit of time, I had to realize that the neck was hopeless.  It was so warped that it had dead spots on it no matter what I did.  So when Guitarfetish had a sale on factory blowout parts, I searched for a bass neck.  Guess what?  I found one.

So I got it for a nice price of $30 plus shipping.  I think the S/H was around $10-$15, but I can't remember.  I got a good deal on it because it had not been cut for a nut yet.  So I cut the slot, and then had to order a bone blank from Hong Kong.  I could have bought it locally, but they want $10-$12 anywhere I looked.  So I bought it for $1.51 (shipping included) from China. 

I then cut it ever so nicely, and got it to fit.  I wish I could say the same thing about the neck.  The neck pocket was a little tight, so I had to shave off a bit of the underside of the neck to get it to fit.  But this bass is so beat up, what's a little damaged to one side?

But I had forgotten one thing.  The original tuners were crap.  So I went back to Guitarfetish, and ordered some cheap bass tuners $17.95 plus $12 shipping.  So my "cheap" project is not starting to get so cheap anymore.

The one thing that made me completely hostile was not the tuners themselves, but the screws that came with it.  I ended up breaking two screw heads completely off.  I've never had that happen in the entire time I have been repairing guitars.  Now, I had it happen twice on one project.  Just complete POS screws.

So let me get everything added up.

Bass - Free!
Bridge - $20
Pickups, pots, and parts - $65
Pickguard - $17
Neck - $40
Tuners - $30
New Strings - $20
Time working on bass - ... a lot.

Total - $192

Mmmm.  Maybe I should have just bought a Squier?  I mean, it still doesn't exactly play that great.  The neck pocket is too deep.  I mean, I'm already shimming the crap out of it.  I might have to shim it some more.  It's just been a money pit.  But I only have myself to blame.  I can never let a project go. 

And to be honest, if I did want to part it out, I can still do that with some of the parts.  Namely, the pickups, bridge and neck.

But still, we don't do this for the money.  We do it for the love of music.  But man, does music have to be so expensive?  If I ever fail as a musician I can always use this as a boat anchor.  I wonder what a fishing Captain makes?

The Bass! Part 4,

Part 1:  http://angjellockheart.blogspot.com/2014/10/the-bass-there-are-no-such-things-as.html

Part 2:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-2.html
Part 3:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-3-punk-rock-bass.html

So I had been waiting on the bridge to arrive, and it finally did. 

While it was not an exact replacement of the old one, the saddles lined up just fine.  And in the end, that's what's important.

I then had to deal with the pickguard not lining up exactly.  However, the use of a long screw took care of a, now, tiny problem.

As you can see, it worked out pretty good.  It holds rather nicely.

However then came a problem I did not forsee.  This happens with older guitar or bass necks.  With no tension on it, the neck is straight.  But with the strings at full tension the heal kicks up.  So I am torn between having insanely high action, or the frets not being playable from the 12th fret up. 

Now, the normal way to correct this is to yank out the frets below the 12th fret, shave the fingerboard, and replace the frets.  However, the fingerboard is maple, and if I shave it I will have to re-finish it.  Right now, I don't have time for that.  I have to make the bass somewhat playable for the next gig. 

Once we cross that bridge, I will go back and start work on it.  I might be able to shave the frets down, and make it playable.  But I'll deal with that when I get there. 

I knew I would be a pain to put this thing together, but I didn't think it would be "THIS" much of a pain.  I did a lot more work on this thing than I had planned to. 

But here's the result.  Not too bad.

The Bass! Part 3, Punk Rock Bass

Part 1:  http://angjellockheart.blogspot.com/2014/10/the-bass-there-are-no-such-things-as.html

Part 2:  http://angjellockheart.blogspot.com/2014/10/the-bass-part-2.html

So I have been having problems with the wiring.  Seriously, I've been working something like a week on it.  But instead of making a long story out of it, I'll just say this.  It seems one of the volume pots was bad, and not sending enough signal through to the tone pot.  That's why I couldn't get the tone pot to work.

I do want to say now that the volume is LOUD!!!  Now that I have a proper working volume pot, it's surprising just how loud these Dragonfire active pickups are.  I can't wait to get strings on this bass.

And simply put, I yanked out everything, and started with all new parts.

So after getting all the electronics working, I made holes for all the screws, and fitted the pickguard and output jack. 

Even though I don't have the bridge yet, I used my straight edge to get a proper angle on how I should shim the neck.  I used a rather thick piece of wood, and shimmed it.  It came out exactly how I wanted.  I may have to adjust it further once I get the bridge in, but it's a good start.

So onto the pictures!!!

So the bass looks very worn and punk rock to me.  It was a great bass to get some practice in on a few things.  More to come when I get the bridge in the mail, and get the bass finally set up.

The Bass! There Are No Such Things As Universial Parts

I had a friend ask me about this Cort bass he acquired.  It was just a neck and body.  It was missing the pickguard, pickups, and electronics.  I told him it would cost more to get it up and running than to buy a used Fender MIM Jazz Bass at Guitar Center.  So in an act of kindness/vengeance he did something very kind/evil to me.  He gave it to me.

This is kind of two-fold good/bad.  I love all things musical.  But even for a roughed up bass that needs more work than it deserves, I just can't let go.  I can't let it go.  So I started work on it.

First off, the frets were shot.  I can do a re-fret in my sleep, so that was the first thing to be done.  And to be honest, the old frets came out easier than any other instrument I've worked on.  So this one really needed some work.

Okay, that's the quick version.  I didn't want to bore you with detail.  Let's say, it's done, Boo ya!

Next, look at this:

You know, the problem with this P-Bass?  It's not a PJ Bass!!!!!!  So I decided to add a Jazz pickup to it.  That means I moved the output jack.  You can see where I drilled the hole for it. 

Let's move on.  Here's the nice little hole I drilled for the Jazz pickup.

I decided to give the Dragonfire active pickups a try.  I was thinking about GFS pickups, but let's be honest, Artec makes all the overseas pickups, I figure there couldn't be too much difference between the two, but that will be in another post.

Here is me fitting the Jazz Bass pickup.

And here is me trying to fit the pickguard to the body.

This is going to be tough.  The Cort has it's own type of pickguard.  So I am making due with what I have.  I had to widen the pickup route for the pickup.  I may have to route out the wood to fit these P-Bass pickups.  I will also have to route out a spot for the truss rod adjuster.  I will then have to make all new holes for the screws.  Not to mention, a new bridge is on it's way from Hong Kong. 

Here's something that I have never encountered before.  When Dragonfire pickups shipped the parts, they included the correct pots.  However, they didn't send any washers, lock washers, or nuts.  What's up with that?  I've never had that happen before.  Never.

So obviously my work is far from done.  What does that mean?  Another blog post of course!  Stay tuned.  I may get a working bass, I may get a pile of junk, who knows?