Guitar Project #7, The Rosewood Telecaster, Part 3

For Part 1:  http://angjellockheart.blogspot.com/2012/05/guitar-project-7-rosewood-telecaster.html

For Part 2:  http://angjellockheart.blogspot.com/2012/05/guitar-project-7-rosewood-telecaster_26.html

So to make a long story short, I finally completed the Rosewood Telecaster.  I'll explain how I did it while posting pictures of my work.

First off, here's the body after routing and shaping.  I got it nice and sanded down.

Next I used Z-poxy to fill the grain.  This really helped one place on the back that had a hallow place in it.

Then I sanded down the Z-poxy.  Sidenote:  It really sands down nicely.

Then I put on the Tru Oil.

After sanding and buffing I had this:

Next, it was time to assemble the guitar. 

I had to use a different bridge pickup than I would have liked, but I will change this one out later.

Here's the shot of the back.

Overall not too bad.  There's a couple of places that I could have done better.  I am going to change the one pickup out when I have the chance/money.  Oh, I also need a strap as I have locking tuners.  So it's playable, but not completely done yet.  But I guess it's close enough for jazz.

Guitar Project #7, The Rosewood Telecaster

So I'm back in the workshop.  As I am finishing up one Telecaster I am starting another.  I think it was more luck that determined my choice of wood than brains.  I inherited a huge piece of Rosewood.  It was big enough to make a Telecaster body out of it without having to glue pieces together.  It was a rare piece of wood that is the perfect size for a guitar body.

Back in 1968 (I believe) Fender made an all Rosewood Telecaster for The Beatles George Harrison.  He used that guitar on the last few Beatles' albums, as well as his solo album, All Things Must Pass.  It had a very distinctive sound to it.

So I knew that this would be the perfect project for me.  Here's a picture where I have just started the rough cutting.

I then laid out the cutting line for the neck pocket, pickups, and control cavity.  I put a few forester bit cuts in the cavities so the router bits could get started.

In this picture, you can see where I have used a mini-router/dremel to route out the cavities.  It may take longer, but I have better control over what I am doing, and where I am cutting.

Next is the view of the back of the guitar.

I am worried about a place right in the middle of the guitar.  If you look (side to side, middle) at the back, you can see what looks like a crack.  It's where the middle of the tree was.  It's a calcium deposit.  I will probably have to fill and glue it up.

I did a bit of sanding on the back, and boy, is this rosewood hard.  It's also heavy too.  I'm betting this guitar will have a weight balance similar to a Paul Reed Smith.  In other words, a very heavy body, but the overall balance will be nice.

More to come when work continues on it.