Showing posts with label work. Show all posts
Showing posts with label work. Show all posts

Sunday, March 19, 2017

Destruction for Palmettos: The Clean-up Begins

When it comes to the yard, I am the guy who mows.  Due to the size of the yard I have a riding mower.  It's a great thing to have since I live in Florida, and the grass and plants are always growing.  The mower can take care of the grass.  When it comes to the everything else, a guy has to get in there by hand.  Again, I'm in Florida and everything grows pretty much all of the time. 

This leads me to the back yard.  When the house was built, there was small batch of palmettos on the back right side of the property.  Over the years these palmettos have gotten out of control.  I try to drive by on the mower, and they do their best to cut me as I go by.  I cut them back every so often, but after twenty-some years, they have gotten massive. 

This also lead to another problem.  Since they were so thick, anything and everything that fell in there just piled up.  This includes, but is not limited to:

  1. Dead leaves.  Mostly from the oak trees above.
  2. Dead palm fronds.  (I could literally knock them down with my rake.)
  3. Dead tree branches.
  4. A huge number of pine needles.
  5. Small trees that somehow made it through the mess.  (Camphor and Cherry trees.)
  6. Garbage that was thrown off the road.
  7. Vines.
  8. More vines.
  9. Vines that manage to make it all the way up into the oak trees.
  10. Vines that have roots that stretch at least forty feet.
So to make a long story short, I took some time out of every Saturday for the last three Saturdays to clean it up.  I only had six large garbage cans, so I would clean until I ran out of cans.  Here's the "after" picture.


I really should have had a "before" picture.  You could have seen that the debris was piled over a foot high.  Also, do you see that utility pole in the center?  That's the electric pole for the neighbors.  So I had a fire hazard on my hands.  That's one reason I really wanted to clean this up.  Also, snakes.

I'm not afraid of snakes.  In fact, I like them.  But there are other people in the house who are terrified of snakes.  So that's one reason I wanted to show these pictures.  Note the nice little holes in these next two pictures.



I know those aren't the best pictures, but I could only get in so far.  The important part is that, I had two places that looked like where small animals could hide away. 

Here's what the palmettos looked like from a closer view.



It's not a bare forest floor, but it's not piled up deep either.  It's where it should be.  Honestly, this should have been done years ago, but I finally got sick and tired of it, and just went ahead and took care of it.  Hopefully I won't have to do this for a few more years. 

Saturday, August 20, 2016

HVAC: Home Edition: Undercutting the Contractors

I am now in month four at Erwin Vo. Tech for HVAC (Heating, ventilation, air conditioning.)  The last two weeks things have finally starting coming together for me.  The things that I have learned from the book are finally being put into real life practice.  And honestly, it couldn't have come at a better time.

You see, the A/C unit at the house had it's scheduled maintenance.  The company that maintains it said that it needed a few things.  First on unit #2, the dual capacitor was weak, and eventually it would need a new one.  The second issue with unit #2 was that the squirrel cage blower wheel needed cleaning. 

Well, after everything I've seen I wasn't sure how true it was.  I know a lot of companies perform the "inspection" for free, and then jack up the price on needed work.  What defines "needed work" can be open to interpretation.  Usually a capacitor either works or it doesn't.  There is no in-between.  Now I will be honest, in that, if a capacitor is weak it may be a sign of dying ...... sometime.  It could be a week, it could be years.  What you don't want is a capacitor to quit working, and then need an "emergency call" to the A/C company.  Then the price will really be jacked up.

So I wanted to get ahead of the curve.  I took a peek at the estimates for the work.  To change the capacitor was $194.24 (before discount,) and cleaning the blower was $256.10 (before discount.)  So if I could take care of this instead of the A/C company it would save a lot of dough.

My instructor was able to purchase the capacitor for $9.40.  I immediately paid him for it in cash, and was ever so thankful.  So when I made it home I got all my equipment and tools out. 

I took lots of pictures, so I will tell the rest of the story along with the pictures I took.  That way, you can understand what I am talking about.

First up, the tools.


And here is the $70, nay, $9.40 capacitor.


Here is the unit.


Here are the guts of the unit.


Here is a close up of the old capacitor.



I made sure to perform the correct math to make sure all the wires were going in the right places on the new capacitor.


So I put the connections on the new capacitor, and then drilled a new hole on the strap.  This capacitor was skinner, but longer than the old one.  So I adjusted the strap to hold it nice and tight.


And here is a picture of the all the completed work.


Honestly, I spent most of my time performing math and adjust the strap.  Other than that it didn't really take long.  So that was now out of the way.

A few days later it was time to tackle the squirrel cage blower.  Again, any little bit of dust on it can result in an A/C company saying it needs cleaning.  So before I even took anything apart, I took a peek at it.  You know what.  They weren't lying.  It needed cleaning.  It needed cleaning badly.  So I took it out and this is what it looked like.



There's nothing too technical about it.  It's just dirty, and I needed to get in there by hand and clean it out.  I used wire brushes, my big flat head screwdriver, and an air compressor to get in, and get that thing clean.  Did I mention it was dirty?  Because I looked like I rolled around in black dirt.



Again, it was more time consuming than it was hard.  I will say this.  My instructor showed me how to clean a blower just two days before.  I also knew that I would have needed a special tool to take the motor out.  If I could have removed the motor, then I would have used a water hose on the blower.  But since the motor was intact, I knew not to get water anywhere near it. 

Using the compressed air really helped.  I was able to get the little bits (and big bits) out of the blower.  I was surprised at the amount of dirt I was able to get out of it.  I ended up with a big ole' pile at my feet.  So this is what it looked like after cleaning.


Not perfect, but still ten times better than it was.  Once the unit was re-installed it actually sounded quieter.  That let me know that all the work I preformed was valid.  And hey, no one had to pay $450 (before discounts) to the A/C company. 

Friday, July 1, 2016

HVAC - Put Your Money Where Your Mouth Is: Part 3

My work continued on our A/C system at the house.  It started with a trip to Home Depot.  Since I needed to replace the insulation on the pipes outside, it was important to pick up some new insulation and zip ties. 

I was so focused on my work I forgot to take pictures, but believe me, the old insulation was falling apart.  It just completely fell apart in my hands.  So I put the new insulation on, and tightened it down with zip ties.  I feel pretty good about it.  Here's the "after" pictures.





The hardest part was just getting around to the back of the units.  The concrete is very hard on the knees.  Luckily, I remembered an old towel I had, so I tucked it underneath my knees. 

I also got back to cleaning the inside coils.  Again, I forgot to take pictures.  But here is what it looked like before.


I talked to my HVAC Instructor Raul yesterday, and he told me to NOT take it out.  Just leave it where it was.  Go ahead and hit it with coil cleaner, and let it sit for five minutes.  Since it sits in a pan, I could use the water hose on low, and the water would drain down the pipes.  I had my shop/vac on standby for any water that made it out of the pan, but not much managed to get out. 

For reference, this is your friend:


So now it's time to let the system run for a bit, and see if everything improves.  It's already gotten colder in the house.  Now it's time to see if the electric bill comes down a bit.  Since this is about the hottest time of year in Florida, the difference should be really noticeable.  Hopefully things will turn out for the best, and I may be able to write part four of this blog.

Sunday, June 26, 2016

HVAC - Put Your Money Where Your Mouth Is: Part 2

So this is the third day I have worked/ cleaned the A/C system.  Today was the day I worked on inside part of the system.  (Yes, I know I could use technical terms, but no one would know what I was talking about.)  So, let me show you a picture of it.


The unit on the right is pretty new so I didn't have to worry about it.  The one on the left is 22 years old, and the one I needed to work on. 

So the question is, "Did it have some mold?"  Well, just a little bit.



And to answer the question, "Did it have a bit of dust in it?"  Well, yes.  Yes it did.


So I took my shop vacuum and went to town cleaning the vents.  I also knocked some of the mold and dust off the sides.


I also went to town with the Lysol.  I will say this, it couldn't hurt.  I'm not sure how much it helped, but I let loose with the Lysol.

The next part was to take the unit out, and use the coil cleaner on it.  However, it was bolted in there so well, I had no idea how to take it out.  So at this time I left it in.  I figured I would do more damage than good if I tried to take it out.  I'm a bit disappointed in myself, but as I get to know more about HVAC I will feel more confident that I can take the unit apart without damaging it. 

So, I will talk to my instructors about the unit, and hopefully in the future I will be able to take it apart without damaging it. 

Saturday, May 7, 2016

The "New" Little Blue Trailer, Part 1

Once upon a time, we had a little blue trailer for hauling wood and such.  But it wasn't big enough.  In fact, I wrote about it five years ago:

http://angjellockheart.blogspot.com/2011/04/little-blue-wagon.html

Here's a picture of it:


Notice the blue color?  Well that was kind of by accident.  I had white paint that I added a can of dark blue paint, and that's the color it gave me.  It was what we call a happy accident.  You see, that color blue almost glows at night.  So when we were driving down the road at night, the trailer could be seen from a half mile back. 

But Dad said the little blue trailer wasn't big enough.  He needed a trailer with dual tandems (a total set of four tires on it.)  That's right, it had to be super heavy duty.

So he bought one with dual tandems.  It was working well until a construction worker with a crane set a 4,000 pound log on it, and then pushed down with the crane.  So, it's now time to rehab, rebuild, and repaint the "new" little blue trailer.

Here's what we are dealing with:



Right now, the wood has been pulled off of it.  Namely, the wood was so banged and torn up that it needed replaced.  So here is the trailer stripped of wood, and the frame halfway painted.  It looks orange in the picture, but it is closer to Spiderman red. 

Here is the beam that was bent.  It is going to need replaced.  Hence, why it and part of the trailer have not been painted yet.


Here's the view from the back:


And here's the view from the side that still needs welded:


So this leads us to the wood.  Since the last blue worked so well, Dad decided he wanted to go with that same blue.  So we went to Home Depot, eyeballed the blue colors, and came up with the blue closest to what we had on the old blue trailer.



Heck if I can tell the difference between the two.  This time, we are doing it right.  The guy at Home Depot colored our primer the same as our paint.  So I am putting both primer and paint down on the wood.  Now, the wood on the upside will get torn up, but it will be protected from water damage on the underside. 

As of this moment I have the primer put on all the wood.  I am letting it dry until tomorrow when I will start adding the regular paint on it. 

So there is still a lot of work to do on it.

1.  Weld the trailer in a few spots.
2.  Replace the bent beam.
3.  Continue with the red paint after all the metalwork is complete.
4.  Continue painting the wood.
5.  Install the wood into the trailer. 
6.  Somewhere in there make sure all the trailer wires are off the ground and working.
7.  Once the wood is completely installed it will probably need another coat of paint.  Since the back of the trailer gets so dinged up, it 's good to have a thicker coat of paint there. 

I will post Part 2 in a week or so once most of the work is complete on the trailer.  Stay tuned!

Wednesday, May 4, 2016

Cause Growing Up Is Hard To Do

So here I am again.  I'm looking at my life, and decide I need to grow up.  You can say what you want to about inner reflection and all that, but the truth is I need to grow up.  I have decided to go forth with a few steps to change my life.

First step.  I have enacted an exercise program.  Every day I try to walk two miles,  bike 6 miles, and lift my one 25 pound kettle weight.  I really needed to get my weight down.  I have noticed some results.  It's been slow going, but like my doctor told me, "If you lose one pound a week, by 20 weeks you'll have lost 20 pounds.  You can't do it overnight."

Step two.  I really need to find long term employment.  The problem is what I have my education in doesn't translate well into jobs.  I have a A.A. Lib Arts degree and a History B.A. degree.  I haven't really done much with this.  I have my luthier's certification.  I should work in China, South Korea, or Indonesia if I wanted to build guitars.  Namely, since that's where they are all made now.

I went to Roadmaster for truck driving school.  Then I became a truck driver, and found out why they always claim to need truck drivers.  Mainly, since they are paying them a lower wage now than in the 1980's.  The other problem is that, I live in Florida.  There's not much freight going in and out of Florida. 

If I lived in Atlanta I would probably still be truck driving.  I could pick up loads in the morning, deliver them, and be back home at night.  But by being stuck in Florida I could only get over the road jobs.  That got old really quickly.  Now, with my health and medical conditions I know I couldn't be an over the road driver.

So that leads me to going back to school.  This time Erwin Tech.


I decided I needed a job that would let me stay in the Tampa Bay area, and still make a decent wage.  That job is HVAC (Heating, Ventilation, Air Conditioning.) 


It has been a bit of a whirlwind the last few days.  I was supposed to enroll for the January 2017 class.  However, two openings came open for the May 9, 2016 class.  So I had to run like crazy to get my financial aid in place.  I had to file for a Pell Grant, so I could get turned down.  I was then able to have Hillsborough County to help me out.  Next, I was able to take my school voucher to Erwin, and get registered. 

Now comes the realization of what I have to do.  I have to learn like crazy for 15 months.  I have to keep my grades up to keep my grant from the county.  I have to stay on top of my game.  I feel I have to work harder since I am an old dog trying to learn a new trick. 

One thing I have to deal with that I didn't expect was that Erwin has a dress code.  I understand that I have to wear leather work boots, but I don't know why I have to a solid color shirt.  Seriously, part of the dress code is that, I have to wear a solid color shirt.  That means all my flannel shirts can not be worn.  But that's okay, I have plenty of shirts, and have even bought a few more.  I will be the best dressed student there.  I have plenty of long sleeve, button up shirts in black, gray, and red.  I also have a few polo shirts in various colors. 


I will receive my books and tools on the first day of school.  But I also need to buy school supplies.  Namely, pens, paper, and a Trapper Keeper.  That's right.  I just went all 80's on myself.  I used a Trapper Keeper from first grade all the way through college.  It has always worked well for me.

Step three.  So now that I have school, this puts a ding the job I now have.  I will now have to find a new job.  So, I decided that now was a good time for a respectable haircut.  On a side note, I did donate my ponytail to "Locks of Love."


Maybe this will help me be able to land a job.  I'm not sure what I will do as far as part time work, but I will do my best try to get something going. 

So that's been my life changing/ growing up plan.  1.  Exercise program.  2.  Enroll and attend Erwin for HVAC.  3.  Get a haircut to try and find a new job.  It's not easy growing up, but we all need to do it sometime or another.  I'm just a late bloomer. 

Monday, July 20, 2015

Rich People Are Weird, Or, How I Learned To Stop Worrying And Act Like A House-Elf

Well, this was certainly a change of scenery.  The last maintenance job I did, I was ran off the property by gun wielding thugs in Section 8 apartments downtown.  I ended up writing three blogs about it.  So last week they sent me to the Pierhouse Channelside Luxury Apartments.  Here's the view:


Let me come straight out with it.  Rich people are weird.  There were a few rules that are considered standard there, and not found anywhere else.

1.  Don’t look at the residents. 



It seems the residents do not like to be looked at.  I guess my psychic abilities have the power to creep into their minds..... but only if I look directly into their souls.

2.  Don’t talk to the residents unless spoken to first.

...... Yes.... Mammie?

 

3.  Do not use the restroom in the office.  Use the ones by the pool area. 

 

I guess the whole, “separate but equal” thing still flies down here.

4.  Do not walk through the pool area, even if you have to go to the restroom.  Residents don’t like the hired help being around them when they are trying to concentrate while “pooling.” 
 
I should be a good house-elf.  The sign of a good house-elf is that he/she does all the housework without being seen.

 

So if I really have to pee, I can’t go in the office, but I can’t go through the pool area to get to the restroom I am supposed to go to?  I think I am a touch confused.  I mean, I could make like a dog, and go on a tree, but there are cameras everywhere, and I don’t want to end up on the internet as, “Sick weirdo thinks he’s a dog.”

 

 

Now, for a few musings to my porter co-workers that are sent to the Pierhouse.  There are a few things they should know if they are sent there in the future.

1.  You need a key to get anywhere. 

 

The whole place is in lockdown.  You cannot get into any part of the building without a key.  Which is fine.  But sometimes they need a few hours to track down a key for you.  They just don’t grow on trees you know.

2.  The dogs are a lot like the owners.

 

This is kind of weird.  Not bad, but just weird.  Usually any apartment complex I go to the dogs will come up and want to slobber all over me.  That’s fine.  Since I am dealing with garbage most of the time, I smell like garbage, and the dogs just love that!  So I play with the dogs, we rub each other bellies, and we all have a good time. 

 

But at the Pierhouse, the dogs ignore me.  I’ve never seen anything like it.  They just walk on by.  True story, I was on my hands and knees unwrapping a garden hose, and a resident with a boxer (the dog, not the fighter) came by.  The boxer gave me one sniff and just walked on by.  I was hoping for at least a face lick or something.  But nothing.  Again, it’s not a bad thing, just a weird thing.

3.  In three days I spent a total of 18 hours moving dirt downhill with a garden hose.  Seriously.  The parking garage needed “cleaned.”  So I figured I was going to take a pressure washer, and get rid of the oily spots.  No.  I was moving the dirt on the ground downhill with a garden hose.  I asked, “Why can’t I just use a blower?  I could knock it out in 20 minutes.”  I was told, “The residents don’t like dirt on their vehicles.  The blower would stir up too much dust and dirt.” 

 

If the residents don’t like dirt they are living on the wrong planet.  But what do I know?  I only have a History degree and not a science degree.  (Sidenote:  I couldn’t pass the chemistry.)

 

But let’s break down the water usage. 

3 gallons a minute X 60 minutes = 180 gallons an hour.

180 gallons X 18 hours = 3240 gallons of water.

Personally, I think that’s an awful waste of water just to move some dirt around.  And that was just one parking garage.  There is another one that needs to be “cleaned.”

4.  And speaking of the garage, the next time I am told to clean it, I want to update my life insurance.  It’s not so bad when I am on the 3rd story.  However, on Friday I was standing right in front of the garage entrance with a water hose praying that I would not be ran over by a yuppie assault vehicle. 

 

Those people were flying in and out of the garage around a blind curve.  I was sure they would find my corpse with a backwards Mercedes Benz  or Lexus logo smashed into my face.  I mean, can you imagine me lying in a coffin with that damned logo on my face?  They can’t spackle a corpse.  That logo is going to be there no matter what.

 

I was hoping that they would have a “Men Working” sign, but I guess they figured I wasn’t working that hard.
 
 
 
So that's my story, and I'm sticking to it.  I only ended up working there three days.  They had already hired someone permanently, and were waiting on the paperwork and drug test to come back.  I was just temping until then.  So I will be off to my next assignment.  Maybe it will be crazy enough to write about?