So A Turkey Walks Into My Neighbor's Yard...

The funny thing about living in Lutz, is that, it's on the edge of Tampa, but it's still a bit country.  I am surrounded by great wildlife.  Yesterday, the red tailed (or red shouldered) hawk flew by.  There are new baby birds in my birdhouse.  This morning three sandhill cranes flew over my head honking the entire time.  And yes, they honk like a goose, and are very loud doing so.

But as I was woodworking I looked into my neighbor Dale's yard.  There, right in his yard was a turkey.  I had my camera next to me because I was taking photos of my wood projects.  So I decided I would take a few photos of the turkey.  I figured I wouldn't be able to take too many photos before it got scared and flew off.  Boy was I wrong.  It just hung around eating stuff out of the flower beds. 

I managed to take a ton of photos.  Even after I discarded the out of focus or redundant pictures, I had thirty pretty good quality photos of the turkey.  I even managed to take two somewhat okay video clips.  I hadn't had a chance to test out how far my camera would shoot.  I have to say I was impressed with it.  The photos turned out great considering how far away I was taking them.

So enough talk.  Here's the thirty photos I took of the turkey in Dale's yard.

Normally I would add the two videos I took, but they are over the host limit.  I'll try to figure out how to edit the size down, and post them later.  Until then, I hope have enjoyed your turkey day.

Cutting The Cutting Boards

Ten years ago my Dad started woodworking as a hobby.  One of the first things that was suggested for him to build was cutting boards.  So he glued up a number of butcher block cutting boards.  He finished a number of them.  We use three of them in the house to this day.  Many more were given to relatives for presents.  However, there were still two that he never finished.

He put them away, and never got back around to them due to other projects.  Not to mention they were tucked away behind other equipment and wood.  I was cleaning out the garage when I came across the two unfinished boards.  It was then that I decided to finish the projects.

First up, this is what I was working with.

It was then that I found out why these were never finished.  I was thinking of planing the boards through my thickness planer.  However, I once I learned that they were constructed end grain up I thought better of it.  With the end grain sticking straight up a planer would chip it up in no time.

So I aimed to run it through my thickness sander.  That's when I discovered that the thickness planer needed some work.  Again, that's one reason the boards had been sitting for a while.  Without a thickness planer it would have to be sanded by hand.  Luckily, I had my mind set out to finish this, so it was onto work.

Luckily, I didn't have to sand  it all by hand.  I had the help of my belt sander and my random orbital sander.  So, I'll make a long story short.  There was a lot of sanding involved.  I started at 36 grit on my random orbital sander and 40 grit on my belt sander.  After that I sanded all the way up to 400 grit.

Here's what it looked like after all the sanding.

Pretty sweet right?  Dad did a good job putting these together.  The are made of maple, black walnut, and cherry.  So now the next part was to put the first coats of sealer on them.  I've been using a tung oil plus catalyst mix for my latest projects.  I love it since it's idiot proof.  Even I can't screw it up and that's saying something.  So here's a photo of the boards after one coat of the tung oil mix.

After this I will start applying butcher's block wax.  Once a few coats are added they will be ready to go.  The good news, is that, I already have a buyer interested in them. 

I have to say, I am extremely happy with the way things turned out.  I was also able to finish another project.  I have plenty of projects started, it's just finishing them that seems to be the problem.  So to cross one off my list feels good.

Make a Little Birdhouse In my ... Backyard? Part 3

I have more news about the little birdhouse in the backyard.  It might help if you know the backstory, so here's the links to my previous blogs about it.

Make a Little Birdhouse In my ... Backyard?

Make a Little Birdhouse In my ... Backyard? Part 2

At the end of my last story a pair of Carolina Chickadees had moved into the birdhouse I put up.  They were gathering materials for a nest.  In fact, it looked to be almost complete in the last blog post.  Well the good news, is that, eggs have been laid!

They laid six eggs, which according to the bird field guide, is the average.  The eggs look to be just a bit bigger than marbles.  I know the photo makes the birdhouse look huge, but it's not that big.  Here's a photo of the bird house.

So while the birdhouse may not be that big, having eggs laid is kind of a big deal.  At least it is in my book.  If you look at my first blog post, I installed the bird house all the way back in October.  So I'm glad that all my preplanning came to fruition.

To celebrate everyone wants to hear the song.  Okay, here's the song.  You know you already have it in your head.

Amp Repair Day: Time To Rock Out With My ... Amps

Admittedly, my title might be misleading.  It's true that I spent a day repairing my amps, but I didn't do anything hard, such as repairing the circuitry.  I have two amps that needed exterior parts repaired on them.  For this blog post I made sure to take lots of photos so everyone would know what I'm talking about.

First up is my Sunn Alpha 212-R amp.  This is the amp that I recorded my album with.  I'm partial to it since no other amp I've played has exactly, "my sound" like this one does.  This amp was built in 1977, so I've repaired/replaced a few things on it.  Lately I'd noticed the grill cloth was near the end of it's life.  So I decided to improve the grill cloth in a few ways.

First up is the "before" photo of my amp.

And here I have it laid out for repair.

Next I removed the grill.

You can see some of the dings here.

Here's the back of the grill.

Say, do you think they put enough staples in the corner?

Just kidding.  I understand why they did that.  Next came the fun, and by fun I mean tedious part.  Pulling out all the staples.  Again, it's not hard, just time consuming.

Boy, that has seen some wear hasn't it?

I bought the old style Marshall grill cloth to replace the old one.  I know purist would say I should replace the original grill cloth with an exact replica, but let's be honest, no amp is original.  Caps, resistors, and tubes are replaced all the time on amps. 

This amp has had a fair amount of work performed internally plus the speakers have been changed.  All in all it's a much better amp than when I bought it.  Since I'm going to keep this one until I die, I'm going to customize it the way I want.

Next it was time to staple the grill cloth on the grill.  Like I said before, it's not so hard as it is time consuming.

There, now that looks pretty nifty.  Let's install it on the amp.

Wow!  That looks even better than I thought it would.  I'm really happy with this.

So now it's time to move on to my next project.  My Laney GH-100-L amplifier head. 

Now there's a large backstory to this amp.  Luckily I wrote about it years ago when I bought it.  Here's the links:

New Broken Amp Day

New Broken Amp Day, Part 2

New Broken Amp Day, Part 3

The Amplifier is a Foot!

The short version of this story is that, I took a broken down Laney amp and got it working again.  However, there were two things I never got around to.  The first was finding a handle that was the right size.  The second was to put a vented backplate on the back of the amp.

First things first.  I took off the old Fender sized handle and installed a "British" style handle.

As you can see the Fender handle was too small.  It left no room for me to wrap my fingers underneath the handle.  So it came off, and the new one when on.

Well, that's the short version of the story.  The new handle wanted to fight me the whole way while installing it.  That, and the receiving piece on the underside of the amp wanted to come loose.  In the end I managed to get it working.

My next project was to install the mesh to protect the tubes.  As you can see the backplate is completely missing.

So I bought a "cut it yourself" mesh to fit.  It should be noted that the mess is insanely sharp, and cut my fingers completely up.  I was aiming to show a photo of my hands on here, but blogger.com might now allow it.  It might violate one of the rules on here, so I decided I'd just skip the gore.

My main point is that, if you ever aim to do this wear gloves.  Bite the bullet and wear gloves.  In the following photo you can see me measuring and preparing the mesh.

Here's the dry fit.  After a bit of fine cutting work it fit perfectly.

Now was time to install a few screws to hold the mesh.

Boom!  It was perfect!  So I finally completed what I aimed to do four and one-quarter years ago.  I want to note that all parts were bought from Mojotone.com.  They are expensive, but everything fit as it should.  I will say this, all parts were of high quality.  I doubt I'll have any problems with them in the future.

So I feel right.  I feel complete.  I managed to knock a few things off my "to-do" list that I'd been aiming to do for years.  Now it's time to rock out.  Yes, I should really be one of those guys who spends more time playing, than he does on the computer talking about playing.  Rock on everyone.